Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connect the Router
1
It is recommended that you follow
the instructions in this Quick Installa-
tion to install the Cable/DSL Router
with 8-Port Switch. However, you can
use the Setup Wizard included on
the CD-ROM to install the router if
you have a Static IP , DHCP , or PPPoE
account from your Service pro-
vider. PPTP users (common in
Europe) need to follow the instruc-
tions in this document.
A
Make sure all devices, includ-
ing your PCs, modem, and
Router, are powered down.
B
If you haven't already done so,
connect your cable or DSL
modem to its proper connec-
tion—the coaxial jack for
cable or the phone jack for
DSL. Follow the instructions from
your cable or DSL modem's
installation guide.
C
Using an Ethernet network
cable, connect the LAN or
Ethernet network port of the
cable or DSL modem to the
Router's Internet port.
D
Connect an Ethernet network
cable to your PC's Ethernet
network adapter.
E
Connect the other end to one
of the Router's Ethernet ports.
2
C
E
Werbung
