Cisco AS5400 Betriebsanleitung & Sicherheitshinweise

Regulatory Compliance and Safety Information
for the Cisco AS5400 and Cisco AS5400XM
Universal Gateways
Read this document before installing or servicing the following systems:
• Cisco AS5400 universal gateway
Cisco AS5400XM universal gateway
•
Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install,
Note
replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code
if you are in the United States.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This document contains the following sections:
56K Statement, page 2
•
Agency Approvals, page 2
•
Maintaining Safe Installation Distances, page 3
•
Translated Safety Warnings, page 4
•
United States, page 53
•
Canada, page 56
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2004 Cisco Systems, Inc. All rights reserved.