Mitsubishi Electric Apricot LS series Installationsanleitungen Seite 9

Connecting to the AC power supply
Power Cable Connections - UK ONLY
External Speakers (where supplied)
INSTALLATION GUIDE
IMPORTANT
Any peripheral equipment that requires an AC power cord must be earthed.
Use the following guidance to connect the components together. It is important that
you take each step in the order indicated.
1. Before connecting any components, ensure that the AC power supply is
switched off or disconnected, and that the system unit, the monitor, and any
peripherals are turned off.
2. Connect the component signal cables to their respective ports on the system
unit: keyboard, mouse, monitor, audio (where appropriate) and any other
peripherals.
◊
Where appropriate, connect the computer to the network.
3. Connect the component power cords: system unit, monitor to system, plus
any other peripherals to nearby, grounded AC power outlets. (Never substitute
a power cord from any other appliance). Then switch on or connect the AC
power supply.
This equipment is supplied with an AC power cord that has a non-removable
moulded plug.
Always replace the fuse with one of the same type and rating which is BSI or ASTA
approved to BS1362. Always refit the fuse cover, never use the plug with the fuse
cover omitted.
Always switch off or disconnect the AC supply before disconnecting any of the
speaker leads, whether audio or power. Disconnect the AC supply from the speaker
power unit when not in use for any period of time.
To prevent the risk of electric shock, do not remove speaker covers.
Connecting the speaker power cord to any other cords or joining cords together can
cause fire and risk of electric shock.
INSTALLATIONSANLEITUNGEN 7