Standards And Legalities - Mitsubishi Electric Apricot LS series Installationsanleitungen

Standards
Safety
Electro-magnetic Compatibility (EMC)
Notes
Legalities
INSTALLATION GUIDE
This product complies with the International safety standard IEC950 and the
European safety standard EN60950 including all national deviations.
This product complies with the following European EMC standards:
Emissions EN50022 Class B
Immunity EN50082-1
This product also complies with the following International EMC standards:
VCCI Level 2
All interconnecting cables (for example, signal and communication cables) should be
less than 2 metres in length. If cable extensions are used, ensure adequate earth
connections are provided and screened cables are used.
If any metal casework components are removed, during upgrade work for example,
ensure that all metal parts are correctly re-assembled and all internal and external
screws are re-fitted and correctly tightened.
This equipment complies with the relevant clauses of the following European
Directives (and all subsequent amendments):
Low Voltage Directive
EMC Directive
Telecommunications Directive
CE Marking Directive
IMPORTANT
This system complies with the CE Marking Directive and its strict legal requirements.
Use only parts tested and approved by Mitsubishi Electric PC Division. Failure to do
so may result in invalidating both the compliance and your warranty. All expansion
cards and peripherals must carry the CE mark to ensure continued compliance.
(Japan)
73/23/EEC
89/336/EEC
91/263/EEC
93/68/EEC
INSTALLATIONSANLEITUNGEN 5