Niko 10-570 Handbuch Seite 29

10-570
2: Transmitting a control function / operating a contact
Co n tr o l a n d L i g ht
1 C on t a c t 1
2 C on t a c t 2
3 C on t a c t 3
4 L ic h t C o n t a c t
B a ck U p
3: Setting automatic functions
Au t om a t F u n c t i o ns
Fl o or D o o r O p e n : D i sa b le
Ca l l D i v e r t :
Do o rm a t i c :
B a ck U p
4: Changing the settings
In t er c o m S e t t i n g
1 U s e r
2 I n s ta l l e r
B a ck U p
4.1: Changing the settings for the user
U se r
K ey T o n e :
R in g V o l :
B ri g h t :
C on t r a s t :
C ol o r :
Ba c k U p
EN
You can operate various contacts via this menu. When the contact is selected, the device
transmits a specific control function. These control functions can be taught to a programmable
.
relay (10-830, 10-836 or 10-837).
"Contact 1" = control function 8 + serial number of the device.
"Contact 2" = control function 9 + serial number of the device.
"Contact 3" = control function 10 + serial number of the device.
"Light Contact" switches the light circuit relay in the power supply.
You can operate relay 10-831, without programming, by using "Contact 1".
D ow n O K
Floor Door: After a floor call, the local door lock can be operated with a programmable relay
10-83x using control function 11 (CF 11). If
this control function is transmitted.
D i sa b le
Call Divert: If this function is active, the call will be diverted to another internal unit.
D i sa b le
Doormatic: If this function is active, the door will automatically open when there is a call (ring-
and-come-in function). This option can be used in home practices of offices with free access.
The green LED lights up if this function is activated.
At the time of delivery, only the "Doormatic" function is available. You, as the installer, can
make the other functions available to the user. See section 4.2.3: "Changing the installation
D ow n O K
parameters".
Both the user and the installer can change certain settings.
However, the installer's settings menu is secured so that the technical settings cannot be
.
changed by the user.
D ow n O K
The beep sound that occurs when the keys on the internal unit are touched can be switched
on or off here.
D i sa b le
Both the ring volume and the image settings can be changed.
       
       
       
       
Do w n O K
is pressed within 30 seconds after a floor call,
29