Change Display Mode; Show Signal Strength; Finding And Adding New Stations; Removing 'Unavailable' Stations - Revo Pico+ Bedienungsanleitung

To Change the Display Mode
Pico+™ has seven different display modes.
Press the INFO/SCAN button to cycle
through each mode.
These display modes are explained in the
table below:
Display option
Normal display
with scrolling text
Type of broadcast
Broadcaster
Time and date
Station name and
frequency
Data rate and
stereo/mono
Signal strength
Example
BBC Radio 1
Sig stren gth 96
Signal er ror 98
To Show the Signal Strength
Press the scroll wheel.
The display shows a signal bar with the
strength of the current station:
Minimum signal level
The indicator on the signal bar shows the
minimum acceptable signal level.
Stations with a signal strength below this
level will not provide a steady stream of
good quality audio.
Finding and Adding New
Stations
As time passes, new stations will become
available in your area. To add them to your
station list simply press and hold the SCAN
button for at least two seconds.

Removing 'Unavailable' Stations

To remove 'unavailable' stations from Pico+'s
station list, ie. those that display a ? before
the station name, see the 'Menu Options'
section on page 8.
English
Strength of signal
7