Manual Tuning; Set Drc; Display Software Version - Revo Pico+ Bedienungsanleitung

English
To use manual tuning
Select the Manual tune option.
The display shows the current station number
and frequency:
Press < or > to step between the stations
and press SELECT to select the current
station.
If there is a station corresponding to this
station number and frequency the display will
show the station name, and a tuning meter
showing the signal strength.
To set the dynamic range control
Pico+™ includes a dynamic range control that
automatically boosts the volume of quieter
sounds for listening in noisy environments.
Select the DRC value option.
The display shows the current DRC value and
allows you to adjust it:
10
The DRC value can be switched between
the following options:
DRC Description
DRC 0 Dynamic Range Control is
switched off
¯ 1 2 C
DRC Dynamic Range Control is
1/2
set to half normal level.
DRC 1 Dynamic Range Control is
switched on; the default
setting recommended for
¯ 1 2 B
noisy environments.
To display the software
¯ 1 2 C
version number
Press the MENU button then use the
• • • • ° • • • • • •
< and > buttons to scroll across to SW
1 2 B
VERSION. The software version number
¯ 1 2 B
is displayed on the top line of the display.
You should specify this when speaking to
Revo Technical Support.
¯ 1 2 C
D R C 1
¯ D R C fi
• • • • ° • • • • • •
1 2 B
¯ 1 2 B
D R C 1
¯ D R C fi
• • • • ° • • • • • •
1 2 B
D R C 1
2 2 7. 3 6 M H z ˘
2 2 5. 6 4 M H z ˘
2 2 7. 3 6 M H z ˘
B B C D A B
2 2 5. 6 4 M H z ˘
2 2 7. 3 6 M H z ˘
˘
B B C D A B
2 2 5. 6 4 M H z ˘
˘
B B C D A B