Programmed Playback (Disc/Usb/Sd) - Teac CR-H258i Bedienungsanleitung

Programmed Playback (disc/USB/SD)

Up to 30 tracks/files can be programmed in the desired
order.
1 Press the PROGRAM button in the stop mode.
P-01 T___
T013 42:38
2 Select a track/file using the Numeric buttons.
P-01 T007
< You can also use the Skip buttons (.//) to
select a track/file.
3 Press the ENTER button.
30
4 Repeat steps 2 and
files.
< If you make a mistake, press the CLEAR button. The last
input track/file number will be deleted.
< Up to 30 tracks/files can be programmed. If you
attempt to programme more than 30 tracks/files,
"P-FULL" appears on the display.
5 When programming has been finished, press the
PLAY/PAUSE button (y/J) to start programmed
playback.
< After playback of all the programmed tracks/files has
finished or you stop the programmed playback, you
can return to the programmed playback by pressing
the Play/Pause button (y/J).
< When the PROGRAM button is pressed in the stop
mode, the programmed contents will be cleared.
3 to program more tracks/