Connecting External Devices Via Bluetooth; System Settings; Internet Settings - Block CR-10ToGo! Bedienungsanleitung

Connect external devices via Bluetooth
Your device is equipped with a modern Bluetooth® interface. These can be used to pair any Bluetooth® source
with the CR-10ToGo!. Possible signal sources are smartphones (iOS, Android, Windows Phone), tablet PCs (iOS,
Android, Windows 8) or music players (iPod, similar) with Bluetooth® function.
To activate the Bluetooth® function, press the „Mode" button on the remote control or on the device and
select the Bluetooth® function in the source menu using the arrow keys or the multifunction knob.
If no Bluetooth® devices have been paired or are in the proximity, the SR- 100 switches automatically to the
pairing mode, the small icon at the bottom of the screen will start to flash.
Now start the Bluetooth® function on your external device and search for devices in your environment. Select
the CR-10ToGo! from the devices found and confirm the subsequent request for pairing.
In case of problems or for further information on pairing, please refer to the operating instructions of the
device you would like to pair with your CR-10ToGo!. Then you can activate the music playback function of
your external device and your CR-10ToGo! will play the music. Please note that with the integrated Bluetooth®
function you can only connect signal sources.
The pairing of, for example, external loudspeakers to the CR-10ToGo! via Bluetooth® is not possible. For this
purpose, use the multi-room function.
1. Playback of audio files:
- Press the „Play / Pause" button on the device or on your remote control to start playback.
- Pressing the „Play / Pause" button again pauses the playback.
2. Select titles:
Press the „Forward" or „Backward" button on the device or on your remote control repeatedly until you have
reached your desired track. Playback will start automatically.
3. To fast-forward or rewind within a track: press the „Forward" or „Backwards" button on your remote control
to fast-forward or rewind within one track.
The Bluetooth® feature does not support the Repeat or Shuffle functions.
As an alternative to the operating functions on the device or with the remote control, you can also control the
music playback on your external Bluetooth® device.
54
® The AUX connection
The rear AUX connector on the CR-10ToGo! processes electrical high-level audio signals in analogous form.
This connector is suitable for all external devices with analogue audio output. Please consult the operating
instructions of the external device for connection. A suitable cinch cable is available in the accessories stores.
The headphone connection
To the headphone jack of the CR-10ToGo! you can use a standard headphone with 3.5 mm
Connect the jack plug. A 6.3 mm jack adapter for larger headphone plug is available in the accessories stores.
The music player (USB)
You can connect a removable drive (such as a USB stick or USB hard disk) to the rear USB port on your CR-
10ToGo!. This storage medium must be FAT 32 formatted in order to be read by the CR-10ToGo!. Depending on
the manufacturer of the storage media, it may be limited in its size.

System settings

Press the „Menu / Info" button on your remote control or on the device and select the System Settings. In the
following menu you can carry out the following settings:
Equalizer
In this menu you can change the sound settings of your CR-10ToGo!.

Internet settings

In this menu, you can change the settings you have made for your Internet connection, for example, when you
change your location. You can also restart the wizard or set up the connection completely manually. Refer to
page 41-42 of this manual.
time settings
Here you can set the time and date manually, change display formats,
Turn on Daylight Saving Time (summer/winter time) or disable automatic date and time retrieval from the
Internet.
language
Here, you can select your preferred display language for the device.
55