The Dab + Radio | Usb; First Setup; In Daily Operation - Block CR-10ToGo! Bedienungsanleitung

The DAB + radio
Press the „Mode" button on the remote control or on the device and select the DAB + radio in the Menu using
the arrow keys or the multifunction knob.

First setup:

1. An automatic search starts. After conclusion of the search all found stations would be shown as a list on the
display.
2. To select the desired station, use the arrow keys on the remote control and confirm with the „Enter" key. If
you want to save this station as favourite, then press one of the keys on the numeric keypad until the message
Saved appears on the display. During operation, you can now call up this station on the numeric keypad of the
remote control. In this way, you can overstore once occupied station memories with new stations at any time.
Press the „left arrow" button on the remote control to return to the list.
3. Repeat steps 1-2 until you have saved all desired stations.
You can save up to 10 stations as favourites.
4. Please use the small reception quality symbol in the lower right corner of the display to optimally align your
antenna.

In daily operation:

1. Start the DAB + radio as described above.
2. The number pad of your remote control allows you to retrieve your stored stations at any time. The respec-
tive station memory location is shown at the bottom of the display. Briefly press the „P" button on the remote
control or on the unit to display a list of all stored stations.
3. The DAB + Radio dispose of digital text functions which are shown on the display. By pressing the „Info" but-
ton on your remote control once or several times, you can, depending on the station, call up further informati-
on; with the „Enter" button you can switch the cover presentation to full screen.
4. Press the „left arrow" key on the remote control to return to the station list.
5. By pressing the „left arrow" key twice on the remote control, you can call up further settings on the device.
The function DRC is irrelevant in Germany, as the DAB + stations do not support this operation. The function
„Clean channels" doesn't remove receivable stations, e.g. after a processing.
6. Use the „Forward" and „Backward" buttons on the remote control or the unit to switch to the next or previ-
ous station within the bouquet.
46
The music player (USB)
You can connect a removable drive (such as a USB stick or USB hard disk) to the rear USB port on your CR-
10ToGo!. This storage medium must be FAT 32 formatted in order to be read by the CR-10ToGo!. Depending on
the manufacturer of the storage media, it may be limited in its size.
Attention! External hard drives require their own power supply
In daily operation:
1. Press the „Mode" button on the remote control or on the device and select the Music Player in the Menu
using the arrow keys or the multifunction knob. Select USB Play from the displayed menu to play music from
your inserted storage media. The CR-10ToGo! will show you the contents of the media on the display. Within
the list you can navigate with the help of the arrow keys on your remote control and select the desired titles or
folders with „Enter" and play them.
2. The functions Play, Pause, Stop, Next track, Previous track, Fast Forward, Rewind, Repeat and Shuffle play
are identical to those described on page 49 of the CD player.
3. You can create your own playlist by selecting a song on the USB media and then pressing the multifunction
knob on the device or pressing the button „Enter" on the remote control. This adds the song to your playlist.
You can delete this playlist by pressing the "Menu / Info" button and selecting Music Player / Delete Playlist.
4. The USB function is capable of storing additional stored information about the titles, e.g. read out MP3 tags.
By pressing the „Menu / Info" button once or several times you can retrieve this information depending on the
file.
A reproduction of cover art is not supported in the music player (USB)
47