Chapter 6 Connecting To A Network; Connecting To A Network - Block IR 100+ Bedienungsanleitung

6

Connecting to a network

› You will need a network connection for „I nternet radio" or „M usic player" operation modes.
› You will need either a router and RJ45 cable or a W-LAN router together with the required pass-
word to establish a connection to your network.
› Your router must have a broadband internet connection for internet radio operation and to
perform software updates.
› When you select and „I nternet radio" or „M usic player" mode, your device will try to connect to
a network. If this is the frst time that a connection has been made or stored networks are not
accessible, then the „Network Wizard" will start. To start the „Network Wizard" manually, select
the following:
MENU › System settings › Network › Network Wizard
Once started you can enter the following information:
› W-LAN region (select a country/select a region from the list)
› Network name (select the desired network)
› An encrypted wireless network will require a password.
› Use the navigation buttons or the „CONTROL" dial to move the cursor through the displayed
characters. Press either the „ENTER" button or the „CONTROL" dial to confrm the selected cha-
racter.
› Select „BKSP " to delete the last character selected.
› Select „C ANCEL" t o cancel your input.
› Select „OK" to confrm the entered code and to try to establish a connection to the selected
network.
› The unit will return to the password entry window, if no connection could be made.
› Under the menu options MENU › System settings › Network › Network Profle you will not be
able to delete desired networks.
Chapter 6
Connecting to a network 47