Icy Box IB-RD3252 Benutzerhandbuch Seite 29

Verfügbare Sprachen

http://www.icybox.de

Dual-Bay RAID Storage Enclosure

for two 3.5-inch Serial ATA

Hard Drives

3.4.3

Alarm Setup

The general alarm sound is the short beep you hear when starting up the system and it will also sound

when something is wrong. To enable or disable the alarm, select ON or OFF respectively.

•

[ON] Beeper and alarm is enabled.

•

[OFF] Beeper and alarm is disabled.

Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the

•

To exit the menu without changing any of the settings, press the [Select] button until you see the

Exit screen and then press the [OK] button.

•

To change the setting, press the [Select] button to choose your preferred mode and then press the

IB-RD3252 Display:

3.4.4

TEMP Alarm Setup

This is the alarm sound you hear when the temperature that is measured by the thermal probe reaches a

•

[Enabled] High temperature alarm is turned on.

Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the

•

To exit the menu without changing any of the settings, press the [Select] button until you see the

Exit screen and then press the [OK] button.

•

To change the setting, press the [Select] button to choose your preferred mode and then press the

IB-RD3252