Icy Box IB-RD3252 Benutzerhandbuch Seite 23

http://www.icybox.de
Dual-Bay RAID Storage Enclosure
for two 3.5-inch Serial ATA
Hard Drives
3. Install the second hard drive and mount it with two screws on each side.
4. Connect the SATA and power cables to your hard drives. Be careful not to damage any
components and
The SATA connector labeled J1 is HDD1 and the SATA connector labeled J2 is HDD2.
5. Slide the inner chassis back into the outer enclosure and fasten the screws to
assembly.
6. After turning on the power and connecting it to the computer use the disk management tool (PC)
or disk utility (Mac) to create a new partition and format the drives. If you have selected the
option to set the RAID mode via LCM display, set the RAID mode
drives.
7. Done! Your drive is now ready to use.
IB-RD3252
that the cables are connected
J2
21
J1
before you format the
the