Herunterladen Diese Seite drucken

Icy Box IB-RD3252 Benutzerhandbuch Seite 24

Verfügbare Sprachen

Verfügbare Sprachen

http://www.icybox.de
Dual-Bay RAID Storage Enclosure
for two 3.5-inch Serial ATA
Hard Drives
Note
This device is designed for two hard drives and does not work when only one HDD is installed.
Important
Upon initial start up of the device and when changing the RAID mode, any existing data on the installed
hard drives will be erased. Please make sure you backup all data prior to installing the hard drives and
prior to changing the RAID mode!
2.2
Replacing Hard Drives
RAID mode is set to RAID 1, the data can still be accessed, however, we strongly recommend replacing
the faulty drive immediately to assure continued proper backup and data safety.
If more than one drive fails at the same time or if the RAID mode is set to RAID 0, the data will be lost
and the system cannot be accessed again until the drive(s) have been replaced.
3.
Open the enclosure and replace the faulty hard drive(s) with a new one.
4.
Finish the assembly and re-connect the power supply.
depending on the drive capacity.
settings. After the system restart, simply format the drives.
Note
will continue rebuilding the data as soon as the power is turned back on.
2.3
Connection to Computer
A few precautions and notes when using IB-RD3252:
Do not expose the product to water or humid conditions.
Do not cover the enclosure's ventilation holes.
Before connecting the device, install the hard drives and set your preferred RAID mode.
For the safe removal of your drive and to assure that no data is lost, always follow the correct
unplug procedure for external hardware (e.g.: Eject the drive before removal).
In order for the computer to access volumes larger than 2 TB, both the hardware and Operating
System need to have the capacity to support large volumes (e.g.: Windows Vista 32bit/64bit or
Mac OS 10.4 and above) or the >2 TB option should be disabled.
When the computer goes into stand-by mode, the external hard drives will spin down as well.
Only one interface can be used at any given time.
2.4
About Data Backup
copies of your data, one copy on your IB-RD3252 and a second copy either on your internal drive or
another storage media such as CD, DVD, Tape or an additional external drive.
Any loss or corruption of data while using the IB-RD3252 is the sole responsibility of the user, and under
no circumstances will the manufacturer be held liable for compensation or the recovery of this data.
IB-RD3252
22
loading