Representation Of A Negative Image; Mirroring Of The Representation - Monacor Security TVCCD-700 series Bedienungsanleitung

submenu for setting a mask can be called via the
GB
middle key (3):
LOCATION...
SIZE...
RTN
Adjustment of the mask:
1) Select "SIZE..." with the keys
2) Press the middle key
3) Adjust the size of the rectangle by means of the
directional keys
4) Press the middle key
5) Select "LOCATION..." with the keys
(4).
6) Press the middle key
7) Move the rectangle to the desired position by
means of the directional keys
(5).
8) Press the middle key
if required.
28
** AREA MASK SET **
(1) and
(3).
(1), (2), (4),
(3).
(3).
(1),
(3) and readjust the size,
For returning to the main menu, select the function
RTN (return) and confirm with the middle key

8.9.2 Representation of a negative image

Via "POSI/NEGA" in the submenu "OPTION", a nor-
mal positive (= "POSI") or the inverted negative re-
presentation (= "NEGA") of the camera picture can
be selected by means of the keys
In some cases, a negative representation can be
useful, e. g. for production surveillance or for viewing
film negatives.

8.9.3 Mirroring of the representation

"H-REV" and "V-REV" in the submenu "OPTION"
(4).
allow horizontal and vertical mirroring of the camera
picture, independent of each other. After selecting
the corresponding item by means of the keys
(5).
and
via the keys
(1) and
The mirror function can be useful, e. g. when
using the camera as rear monitoring system in a ve-
hicle (H-REV = ON) or when upside-down mounting
of the camera is required for connection purposes
(H-REV and V-REV = ON).
(2), (4),
For returning to the main menu, select the func-
tion RTN (return) and confirm with the middle key
(3).
(4), the mirror function is switched ON or OFF
(2) and (5).
(3).
(2) and (5).
(1)