Line Zoom; Enlargement Of A Picture Section; Line Exit Exit Of The Setting Menu - Monacor Security TVCCD-700 series Bedienungsanleitung

8.10 Line ZOOM – enlargement of a picture section
The function ZOOM allows a digitally enlarged re-
presentation of the central picture section. The en-
largement can be adjusted in 32 steps up to the
maximum of double zoom.
With the menu item "ZOOM" selected, the keys
(2) and (5) are used to switch the zoom func-
tion ON or OFF. If "ON..." is selected, the enlarge-
ment factor can be defined via the submenu below
by pressing the middle key
** ZOOM **
ZOOM >————+— —<
RTN
After selecting "ZOOM" with the keys
(4), the enlargement factor can be adjusted via
the keys (2) and
(original, left stop) and two (right stop).
For returning to the main menu, select the function
RTN (return) and confirm with the middle key
(3).
(1) and
(5) in 32 steps between one
8.11 Line EXIT – exit of the setting menu
Via this menu item, exit of the setting menu is possi-
ble. The keys
justments made are maintained (= SAVE) or if the
factory-set values are restored (= PRESET).
By pressing the middle key
menu will disappear.
Attention: Activation of the option "PRESET" re-
sults in irretrievable loss of all settings made by the
user. They are replaced by the factory-set values.
The factory-set values are summarized in the table
below:
TITLE
SENSE UP
ALC/ELC
BACKLIGHT
AGC
W/B SELECT
OPTION
ZOOM
EXIT
(3).
(2) and (5) determine if the ad-
(3), the setting
OFF
AUTO X64
ALC...: WDR = OFF, SHUTTER = OFF,
IRIS = average value , W W/B = OFF
OFF
ON
ATW
MASK A..D = OFF, POSI, H-REV = OFF,
V-REV = OFF
OFF
SAVE
GB
29