Disclaimer; Quality Test Reports; Warranty And Notification Of Faults - HYDAC International OK-EL Installations- Betriebs Und Wartungshandbuch

24

14. DISCLAIMER

ATTENTION
The operating conditions and installation instructions described
in this manual are the basis for safe working practice and should
not be deviated from without HYDAC's permission.
HYDAC is not responsible for any damage due to external causes,
including but not limited to, improper use, problems with electrical power,
accident, neglect, alteration, repair, improper installation, or improper
testing.
Any change to the product shall invalidate the warranty.
ATTENTION
If HYDAC labels and marks are removed or become illegible then all
warranty claims shall be invalid. HYDAC labels may not be changed
or removed. The customer must ensure traceability.
HYDAC reserves the right to make technical modifications
without prior notice.
IMPORTANT:
Please contact us in case of faults.
To resolve faults without our prior written consent shall invalidate
the warranty.
Check that the connections are correct and the oil is flowing freely.

15. QUALITY TEST REPORTS

All HYDAC cooler units are subject to a final quality test.
The quality test report is available on written request.

16. WARRANTY AND NOTIFICATION OF FAULTS

All coolers sold are subject to the HYDAC "GENERAL CONDITIONS
OF SALE AND DELIVERY".
Any notification of fault under warranty should be advised in writing
using the "HYDAC Complaints Form Q002" available on request.
We will not accept liability for improper usage.
Any changes and / or repairs carried out on products in order to resolve
faults without our prior written consent shall invalidate the warranty.