Introduction; Symbols - HYDAC International OK-EL Installations- Betriebs Und Wartungshandbuch

Installation, Operation
and Service Manual
For Cooler Types:
OK-EL, OKA-EL, OKAF-EL;
AC-LN; ACA-LN, ACAF-LN;
OK-ELC; OK-ELD; OK-ELH;
OK-EL MI; AC-LN MI;OK-P; SC, SCA, SCAF,
OSCA, OSCAF; CMS; WT

1. INTRODUCTION

This manual is a guide for the installation, maintenance and operation of
HYDAC coolers.
To obtain the maximum efficiency, optimize the performance and prevent
incorrect use, we strongly recommend that this entire manual is read
carefully and all safety precautions are implemented before starting
installation and putting the cooler into service. This manual must be
available at all times: it is a part of the product. If lost, the manual should
be replaced immediately.
The cooler may not be used for any purpose other than cooling fluids in
accordance with the guidelines and instructions set out in this manual.
This manual illustrates a typical installation procedure for a cooler. Some
common options are also included. Refer to separate installation drawings
for additional optional equipment. Review all manuals and drawings prior to
assembly. These documents are located inside the cooler packing carton.
Contact your HYDAC sales representative if questions arise.

2. SYMBOLS

ATTENTION
Failure to follow the indicated instruction
can endanger personal safety.
WARNING
In addition to possible serious injury or death, failure to follow
the indicated instruction may cause damage to equipment.
DANGER
Failure to follow the indicated instruction
may result in serious injury or death.
15