Retrofitting A Seuthe Steam Generator - roco Rh 38 Serie Handbuch

▪

Retrofitting a Seuthe steam generator

First remove the chimney hood and then install the Seuthe steam generator no. 10
(for analogue DC operation) or no. 11 (for digital DC operation).
When dealing with a steam generator installed in digital mode complete with a
retrofitted 10880 decoder, it is possible to switch the steam generator on and off via
the F1 key.
Functions when operated with bridge plugs (= analogue operation):
– Light change (dependent upon direction of travel)
– Seuthe 10 smoke generator (if retrofitted)
Functions when operating with a retrofitted 10880 decoder (= digital operation)
F0 = Light change (dependent upon direction of travel)
F1 = Seuthe 11 smoke generator (if retrofitted)
72124.indd 29
1.
2.
3.
29
05.04.2019 12:24:11