Replacing The Interior Lamp - Beko RBI6302 Bedienungsanleitung

Replacing the interior lamp

Should the light fail to work, proceed
as follows.
1. Switch off at the socket outlet and
pull out the mains plug.You may find
it useful to remove shelves for easy
access.
2. Use a flat tipped screwdriver to
remove the light diffuser cover.
3. First check that the lamp hasn't
worked loose by ensuring it is
screwed securely in the holder.
Replace the plug and switch on.
4. If the lamp works, replace the light
cover by inserting the rear lug and
pushing up to locate the front two
lugs.
5. If the light still fails to work, switch off
at the socket outlet and pull out the
mains plug. Replace the lamp with a
new 15 watt (max) screw cap (SES)
lamp.
6. Carefully dispose of the burnt-out
lamp immediately.
7. Replacement light lamp can easily be
obtained from a good local electrical
or DIY store.
12
EN