Network settings
Network parameters are entered through the configuration program that is run the
first time the system is turned on. If the system is moved or the network parameters
have changed, new network settings can be entered through the Options menu.
1.
Press Options > Advanced Options > Network.
2.
Select Auto IP address if you know that your network has a DHCP server and
thus your system can automatically retrieve its network connection
parameters. Otherwise, enter the IP address, subnet mask and default
gateway manually.
Save settings
Press Options > Advanced Options > Save Settings.
This will save the current settings as the new system default settings. The saved
settings will be reapplied when an Auto Reset is triggered (see above).
Reset settings to the factory defaults
Press Options > Advanced Options > Factory Default.
This will restore all settings to their factory defaults. The standard Original Types
that came with the program are restored to their original settings. Resetting to
factory defaults is an administrator function and may require a password.
Other advanced options
●
Manage Destinations is described under
on page
●
Calibrate Screen is described under
on page
●
Software Update is described under
on page
●
Service is an option for service technicians and not within the scope of this
guide.
24
Chapter 2 Basic operations
6.
29.
37.
Set a destination folder for scans
Calibrate the touch screen pointer
Install new system software
ENWW