HP Designjet T1120 SD-MFP Kurzübersicht Seite 22

Set quality when scanning to print
When copying (scan-to-print), you set general print-quality parameters (Fast,
Normal, Best) that apply for the whole copy process (scan and print).
●
The scan quality is defined by resolution (dpi). You can select the scan
resolution you want tied to each quality setting (Fast, Normal, Best). This is
done through the Original Type adjustment options (see below).
●
The print quality parameters that are tied to a quality setting (Fast, Normal,
Best) are defined in the printer.
1. Press the Copy button and then the Quality button to open the print Quality
dialog.
2. Select the required quality setting from the list.
●
Fast is for making a quick draft with minimum use of ink.
●
Normal is good for most copy jobs that require an average quality level.
●
Best is for high-quality prints.
Tie scan resolutions to the Fast, Normal, Best quality settings (scan-
to-print)
1. Press the Original Type button and then the More button to open the Original
Type's adjustment options.
2. Scroll down the list of adjustments to reach the buttons Fast Scan
Resolution, Normal Scan Resolution and Best Scan Resolution.
18 Chapter 2 Basic operations ENWW