Batch Scan And Batch Copy - HP Designjet T1120 SD-MFP Kurzübersicht

See also:
●
Set and preview image adjustments on page 15
●
Set input and output sizes on page 13
●
Set the output quality on page 17
●
Set a destination folder for scans on page 6

Batch scan and batch copy

With batch scanning and batch copying you can continuously feed new originals
into the scanner and the system will start processing right away without waiting for
you to press the Start Scan/Copy button. The system will apply the current settings
to all documents. If you are scanning to file, your files will automatically be named
with increasing numbers.
1. Lay your originals face up, near the scanner so they are easily reached.
2. Make your scan or copy settings. These will apply for all the originals in the
batch.
3. Press the Batch Mode button to turn batch mode to On.
4.
Press the Start Scan/Copy button
5. If you have already loaded the first original, the system will start scanning or
copying. If not, the Batch Mode dialog will ask you to insert the first original
into the scanner.
6. When you insert the first original, the system will start scanning it right away.
10 Chapter 2 Basic operations
.
ENWW