System Setup And Options - HP Designjet T1120 SD-MFP Kurzübersicht

File action buttons
To use the action buttons, check one or more boxes next to file names and then
press the relevant action button.
●
Copy: To copy one or more selected (check-marked) files to another folder.
●
Move: To move one or more selected (check-marked) files to another folder.
●
Rename: To change the name of a selected (check-marked) file.
●
Delete: To delete one or more selected (check-marked) files from the system.
●
New folder: To create a new subfolder in the current folder.
●
All / None: will toggle between checking and un-checking the boxes to the left
of all the file names in the current folder being viewed.
●
View: Opens a separate window with a larger view of the image file currently
displayed.

System setup and options

Basic options
Set date and time
Local date and time parameters are entered through the configuration program that
is run the first time the system is turned on. If needed you can change the local date
and time settings through the Options menu.
1. Press Options > Basic Options > Date & Time.
2. Enter the correct local date and time values and time zone. The date and time
settings will be used with various program actions.
Units of measure
1. Press Options > Basic Options > Units of measure.
2. Select the preferred unit (such as inch or mm) to use when defining document
sizes.
22 Chapter 2 Basic operations ENWW