Herunterladen Inhalt Inhalt Diese Seite drucken

Kärcher 250 spot Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für 250 spot:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
ENGLISH
Please first fold out the left cover pages with the illustrations.
Unit diagram
1
Battery cover (not shown)
2
Carrying handle
3
Switch – spraying and vacuuming
4
Indicator lamp
5
Fresh-water tank
5a
Cap – fresh-water tank
6
Dirty-water tank
6a
Locking button – dirty-water tank
7
Threaded connection hose to unit
8
Plug-and-socket connection
hose to cleaning head or
hose to upholstery nozzle
9
Shoulder strap
9a
Fastening point for shoulder strap
10
Fastening point for waist belt
11
Spray button
12
Upholstery nozzle
13
Cleaning head
13a Slider – cover
13b Rubber blade
13c Felt strip
1. Preparing the unit for use
Applications
• Removal of marks from upholstered furniture,
carpets or hard surfaces with the upholstery
nozzle.
• Cleaning of windows, tiles or smooth surfaces
(e.g. mirrors, kitchen cabinets, shower
surrounds) with the cleaning head.
!
Information about the battery
• The Window Washer should only be used with
the lead gel battery that has been supplied with
the unit. Use only the supplied charger to
charge this battery.
• The battery should never be allowed to become
fully discharged, so charge it as soon as the
indicator lamp on the unit illuminates
continuously or if there is a marked reduction in
performance (demonstrated by a drop in the
noise level and poor vacuuming results).
• We recommend that the battery is recharged
overnight after each use of the unit.
Overcharging cannot happen when doing so.
• If the unit is to remain unused for a lengthy
period of time, store the unit only with fully
charged battery.
• See Chapter 3 for technical specifications
relating to the battery and charger.
Charging the battery
• Open the cover at the rear of the unit and insert
the battery in such a way that the battery
contacts make contact with those of the unit.
Close the cover again. (Fig. A, B)
• Charge the battery by connecting the supplied
charger to the unit and then plugging the
charger into a mains socket. The indicator light
on the unit should illuminate to show that the
equipment has been correctly connected to the
mains. (Fig. C)
• After the battery has been on charge for approx.
15 hours, disconnect the charger from the mains.
4
Window Washer

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis