Troubleshooting - ophardt RX 5 T Bedienungsanleitung

12. Troubleshooting

12. Troubleshooting
If the appliance malfunctions, please remove batteries or unplug it from the mains.
Characteristic
1.| The appliance seems to
function normally but no
medium is dispensed.
2.| The appliance doses too much or
not enough medium
3.| The appliance doesn' t dose
If the issue cannot be resolved, please contact the manufacturer.
OPHARDT Hygiene-Technik GmbH & Co. KG
Lindenau 27 | 47661 Issum | Germany
Tel.: +49 2835 18-10 | Fax: +49 2835 18-77
www.ophardt.com | E-Mail: customer care@ophardt.com
Possible cause
| No receptacle is inserted.
| No pump is installed.
|Appliance is not closed
| Pump is clogged.
| Receptacle is empty.
| Pump is not primed for operation or has
lost contact to the medium.
| An unsuitable medium has been used.
| The number of strokes has not been set
correctly
| Batteries are empty
| Batteries have not been inserted correctly.
Instruction manual
Solution
| Insert full receptacle.
| Insert pump into the dispenser.
| Close the appliance
| Remove pump and clean it.
| Replace receptacle.
| Carry out the dosage process several
times. If it doesn't function, the pump
is possibly clogged.
| Use another medium.
Clean the pump thoroughly before.
| Adjust the number of strokes.
See section 9.
| Insert new batteries.
| Pay attention to the polarity
| RX 5 T
27 27