Changing Stroke; Led Function - ophardt RX 5 T Bedienungsanleitung

9. Changing dosage / 10. LED Function
9. Changing dosage
The dosage can be varied by selecting one, two or three strokes per activation. If set for multiple strokes
the dispenser will only operate as long as a hand is present. If the hand is removed it will complete the
current activation and then stop the dispenser.
The dispenser is supplied, set to single stroke as standard.
With the faceshield open press the tab (see 7.2) (left hand side) to increase the number of strokes.
The LED will flash amber when the tab is pressed correctly.

10. LED Function

Underneath the faceshield there is an LED which lights green, red and amber.
Pressing the tab
1st time
2nd time
3rd time
Colour Explanation
RED (Continuous) Faceshield open/not closed correctly
RED (Flashing) Batteries low
Green Unit dispensing
Amber Stroke selection (based on number of flashes)
Instruction manual
Number of flashes Number of strokes
2 flashes 2 stroke
3 flashes 3 stroke
1 flash Returns to 1 stroke
| RX 5 T
25 25