RX 5 T |
Instruction manual
7. Going into operation
1
7. Going into operation
7.1 Insertion/Replacement of the batteries
Remove bottle and turn dispenser upside down to expose the battery
compartment (fig. 1).
Open battery cover by sliding it to the back of the dispenser and then
rotating it upwards.
Insert batteries as per marked on the battery compartment (fig 2).
Pay attention to the polarity.
NOTICE
Batteries should be removed in the dispenser if not used for a prolonged period of time.
1
1.
2.
22
2
7.2 Inserting the pump & bottle
Open the faceshield by pulling forward (1.) and rotating it upwards
and towards the rear of the dispenser (2.) (fig. 1).
NOTICE
Remove the stored media before transport!