ophardt RX 5 T Bedienungsanleitung Seite 23

7. Going into operation
2
Slide the pump into the chassis guides (a) and past the lock tab (b) as
shown (fig. 2 and fig. 2.1)
3
With the bottle at an angle slide the bottle up onto the pump.
Push down on the front of the faceshield ensuring that it has closed
correctly (see that back and sides match). Raising the bottle off the
table or moving it to the edge of table may facilitate easier bottle
installation.
2.1
(a)
(b)
4
Instruction manual
| RX 5 T
23 23