Inserting/Removing Grill Plates - Beem Pro-Multi-Grill 3 in 1 V2 Bedienungsanleitung

BEEM - Elements of Lifestyle
13 Upper grill plate
14 Oil drain
15 Lower grill plate
16 Drip tray
17 Cleaning spatula
18 User manual (not illustrated))
BIO-LON KERAMIK
non-stick coating
(model 19 .001)
The BIO-LON non-stick
coating not only distin-
guishes itself by health and
environmental awareness
but also has other special
features:
■ high scratch resistance,
■ environmental friendliness,
■ durability,
■ optimum heat distribution
■ fast heating up and long heat storage,
■ simple cleaning.
BIO-LON furnishes the grill pates with out-
standing characteristics:
■ lotus beading effect
■ low fat requirement,
■ no sticking or burning
■ temperature resistant up to approx.
400 °C
■ hardness that withstands even the strong-
est loads.
BIO-PLUS GRANIT
non-stick coating
(model 19 .002)
The granite stone sealing
is extremely scratch proof,
hard and durable.
This allows preparation of
dishes without burning or
sticking – even without oil
or fat.
The BIO-PLUS GRANIT grill plates are easy
on nutrients and preserve vitamins. Cleaning
succeeds effortlessly.

Inserting/removing grill plates

NOTE!
► The grill plates are interchangeable.
► Allow the appliance to cool down
inserting/removing the grill plates.
Inserting the lower grill plate
(see images A1 and A2)
1. Push both supporting hooks into the ap-
propriate recesses at the back of the lower
part of the housing.
2. Press the grill plate down until it engages
audibly.
Removing the lower grill plate
(see image B)
1. Press the unlocking button (8) and re-
move the grill plate.
Inserting the lower grill plate
(see images C1 and C2)
1. Hang the grill plate onto the lower sup-
porting hook on the upper part of the hous-
ing.
2. Press the grill plate down as illustrated
until it engages audibly.
Removing the lower grill plate
(see image D)
1. Press the unlocking button (3) and re-
move the grill plate.
Inserting the drip tray
(see image E)
1. Push the removable drip tray (16) from
the front into the opening on the back of the
lower part of the housing until it engages.
Setting the gap
(see image F)
The gap between both grill plates can be set
using the spacer and is dependent on the
thickness of the food to be grilled.
1. Push the spacer (10) to the desired posi-
tion so that it lies securely on the desired
level of the rest support (11).
EN 15
before