Operation - Husqvarna AUTOMOWER 105 Bedienungsanweisung

Husqvarna recommends to let
mode be turned on to save energy and
avoid interference with other
equipment.
Accessories
Applicable for Automower
310/315/315X/420/430X/440/450X
37.1 Operation selection
®
Automower 105
By consecutively pressing the Operation
selection button many times, one can choose
between three different operation modes.
HOME . Sends the product to the charging
•
station. It remains here until another
operation mode is selected. When the
battery is fully charged, the product will not
leave the charging station and begin mowing
until the operation selection is altered to
AUTO .
AUTO . The standard, automatic operation
•
mode where the product mows and charges
automatically.
MAN . When mowing secondary areas the
•
MAN setting must be used. If MAN is
selected and the product is started when it is
out on the lawn, it mows until the battery
runs out. It then stops and the 'Needs
manual charging' message appears. The
product must then be moved manually to the
charging station and then started manually
after charging. If the product charges in the
MAN mode, it will fully charge, move about
20 cm / 8". out of the charging station and
then stop. This indicates that it is charged
and ready to start mowing.
37.2 Operation selection START
®
Automower 310/315/315X/420/430X/
440/450X
When the START button has been pressed the
following operation selections can be selected:
MAIN AREA . The standard operating mode
•
where the product mows and charges
automatically.
903 - 001 - 21.09.2018
ECO
®

37 Operation

•
•
•
This menu handles the settings for the
product accessories, for examples
Automower Connect or Automower
Connect@Home. Contact your local
Husqvarna representative for
information on what accessories are
available for your product.
SECONDARY AREA . When mowing
secondary areas this setting must be
chosen.
If the product charges in the Secondary area
mode, it will fully charge, drive out about 50
cm / 20" and then stop. This indicates that it
is charged and ready to start mowing. If the
main work area has to be cut after charging,
it is appropriate to switch the operation
Main area before placing the
selection to
product in the charging station.
OVERRIDE TIMER . Any timer settings
made can be temporarily overridden by
selecting Override timer. It is possible to
override the timer for 24 h or 3 days.
SPOT CUTTING (Not available for
®
Automower 310). The product works in a
spiral pattern to cut the grass where it has
been mown less than in other parts of the
lawn.
Spot Cutting function is activated with
The
the START button. You can select how the
product should continue to work once
mowing is finished by pressing right arrow
Main Area or Secondary
and then specifying
Area .
Operation - 99