Control Panel - Husqvarna AUTOMOWER 105 Bedienungsanweisung

WARNING: Use the plug to disconnect
the charging station, for instance
before cleaning the charging station or
repairing the loop wire.
WARNING: Place the low voltage
cable and adjust the cutting height so
that the blades on the blade disc can
never come in contact with the cable.
WARNING: To reduce the risk of
damage to electrical components,
disconnect all connections to the
charging station (power supply,
boundary wire and guide wires) if there
is a risk of a thunderstorm.
For more instructions on how to do a proper
installation, see chapter
complete Operator's manual on Husqvarna's
website www.husqvarna.com.

36.2 Control panel

All commands and settings for the product are
made via the control panel. All functions are
accessed via a number of menus.
The control panel consists of a display and a
keypad. All information is shown on the display
and all input is done using the buttons.
Note: The display texts are shown in English in
the manual, but you will see the texts on the
product display in the chosen language.
36.3 Display Automower
When the STOP button has been pressed and
the hatch is opened, the operation window
appears showing the time, selected operating
mode, number of mowing hours, battery status
and timer setting.
96 - Installation
Installation in the
®
105
• The clock shows the current time.
• Date shows the current day.
• The number of operating hours indicates the
number of hours since the day of
manufacture that the product has been in
operation. The time that the product has
spent mowing or searching for the charging
station is counted as operating time.
AUTO , MAN or HOME show which mode of
•
operation is selected.
• The battery status shows the remaining
battery charge.
• The ECO symbol is displayed if the product
ECO mode .
is set in
• The clock symbol indicates when the timer
settings are set. The clock symbol is black
when the product is not allowed to mow due
to a timer setting.
MENU text illustrates that the main
• The
menu can be reached by pressing the multi-
choice button that is located under the text.
36.4 Keypad Automower
The keypad consists of 4 groups of buttons:
• The START button is used to activate the
product. This is normally the last button to
be pressed before closing the hatch.
• The 3 multi-choice buttons offer various
functions, depending on where in the menu
structure you are.
• The number keys are used for instance to
enter the PIN code or time settings.
• The operation selection button is
symbolised by a house. When the button
has been pressed, the selected operation
mode is shown in the display.
36.5 Display Automower
310/315/315X/420/430X/440/450X
When the STOP button has been pressed and
the hatch is opened, the following information is
displayed:
®
105
®
903 - 001 - 21.09.2018