LaCie 2big Dock Thunderbolt 3 Kurzanleitung Seite 6

Online resources
To learn more about managing your LaCie storage device and RAID array, see the online
user manuals below.
• LaCie 2big Dock Thunderbolt 3: www.lacie.com/2big-dock-guide
• LaCie RAID Manager: www.lacie.com/lrm-guide
Changing the RAID
For data redundancy, you can use LaCie RAID Manager to change the RAID array from the
default RAID 0 to RAID 1. For more information on how to change the RAID,
see www.lacie.com/lrm-guide.
After changing the RAID array, make certain to format the drives for your operating system.
For instructions on formatting, see the partitioning and formatting chapter in the user
manual: www.lacie.com/2big-dock-guide.
Problems connecting with Thunderbolt 3 on Windows
If the LaCie 2big Dock does not mount or is not detected by your PC, please go to
www.lacie.com/support/2bigDockTBT3 to download and install the 2big Dock
Thunderbolt 3 driver for Windows.
If you continue to have problems using Thunderbolt 3 with Windows, check with your PC
manufacturer for updates to the:
• BIOS
• Thunderbolt 3 firmware
• Thunderbolt 3 drivers
Review details of your 2big Dock Thunderbolt 3's warranty by opening the LaCie Limited Warranty
Statement on your drive or go to www.lacie.com/warranty. To request warranty service, contact
an authorized LaCie service center or refer to www.lacie.com/support/2bigDockTBT3 for more
information regarding customer support within your jurisdiction.
6