LaCie 2big Dock Thunderbolt 3 Kurzanleitung Seite 5

Install LaCie RAID Manager
3
LaCie RAID Manager helps you to configure your LaCie storage device's RAID array and
maintain its health.
Your LaCie device is delivered formatted as HFS+ for Mac with a single RAID 0 array.
Review the instructions below for your operating system.
1. Use the Finder to open your storage
device and launch Start Here Mac.
HD
LaCie
2. Follow the onscreen instructions to
register your device and download
LaCie RAID Manager.
Start Here Mac
Configure and format storage:
The disks must be formatted since Windows
does not support HFS+.
1. On the computer that will connect to
the LaCie storage device, go to
www.lacie.com/support/lrm.
2. Download LaCie RAID Manager for
Windows.
3. Launch the installer and follow the
onscreen instructions to complete
the installation.
4. Use LaCie RAID Manager to delete the
current RAID array and create a new
one. For instructions, see
www.lacie.com/lrm-guide. After
creating a new RAID array, the drives
must be formatted for Windows. For
instructions, see the formatting chapter
in the manual, www.lacie.com/
2big-dock-guide.
5