4.3 VCHD-4322IR
Note:
At the installation, please ensure that the little holes next to the screws are not blocked or
clogged! In case of backwater, these little holes ensure that the water leaves the camera
housing.
Lens:
Lens control (focal length and focus) is done by the two setting rings. Carefully loosen the
two safety screws a bit so that you are able to turn the setting rings. Adjust the lens
according to your needs. Finally, seize the two safety screws again carefully (see picture 4).
Picture 1:
Housing for
surface mount
Picture 2:
Screws to open the camera
housing
_________________________________________________________________________________
VCHD-1622 / VCHD-2622 / VCHD-4322IR / VCHD-2792IR
- 36 -
Bedienungsanleitung / User manual
Housing for
ceiling mount