Safety Informations - Sinmag Europe Divo Handbuch

ENG
1.3 Features

2. SAFETY INFORMATIONS

2.1 Safety symbols
For your safety, please pay attention to the following symbol as marked on the machine:
This label warns that only qualtified service personnel can access this
position and the operator must disconnect the power before carrying out
any cleaning or servicing.
2.2 Working safety information
The machine must only be used by personnel suitably trained for the purpose and who
have been trained in the contents of this publication.
To ensure safety work, comply with the following instructions:
1.
Install the machine in compliance with workplace safe work requirements.
2.
Don't place the machine near a source of heat and this machine must not be used in
a place where the surrounding environment may have a potential risk of explosion.
3.
Use the machine with great care and never be distracted.
4.
Do not wear loose fitting clothing or with wide or open sleeves.
5.
Do not remove, cover or modify the identification plates paced on the machine body.
6. Do not use the machine as a working surface or area and do not place any objects
on it that are not required for normal working operations.
7. Do not use machine with temporary electrical connections or non-insulated cables.
8.
Periodically check the state of the power cable and the cable clamp on the machine
body, replace it as soon as is necessary by qualified personnel.
9.
Stop the machine immediately as soon as there is any defective or abnormal opera-
tion, a breakage, any incorrect movements, or unusual noises.
10.
Before cleaning or carrying out maintenance, disconnect the machine from the
electricity mains.
11.
Use protective working gloves for cleaning and maintenance.
4
1
2
3
4
5
Protection handle.
1
Automatic lid closing system.
2
20 divisions. (100~950g).
3
Stainless steel bowl, blade and cover.
4
Automatic blade lift system.
5
SINMAG EUROPE BVBA