Herunterladen Inhalt Inhalt Diese Seite drucken

Noise/Vibration Information - Bosch IXO Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für IXO:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power tool is less than
70 dB(A). Uncertainty K = 3 dB. The noise level when working can exceed
80 dB(A).
Wear hearing protection
Vibration total values a
cording to EN 62841-2-2:
Screwdriving: a
< 2.5 m/s
h
The vibration level and noise emission value given in these instructions have
been measured in accordance with a standardised measuring procedure and
may be used to compare power tools. They may also be used for a prelimin-
ary estimation of vibration and noise emissions.
The stated vibration level and noise emission value represent the main ap-
plications of the power tool. However, if the power tool is used for other ap-
plications, with different application tools or is poorly maintained, the vibra-
tion level and noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total working period.
To estimate vibration and noise emissions accurately, the times when the
tool is switched off or when it is running but not actually being used should
also be taken into account. This may significantly reduce vibration and noise
emissions over the total working period.
Implement additional safety measures to protect the operator from the ef-
fects of vibration, such as servicing the power tool and application tools,
keeping their hands warm, and organising workflows correctly.
Assembly
Before any work on the tool (e.g. maintenance, tool change etc.) as
u
well as during transport and storage, set the rotational direction
switch to the middle position. There is risk of injury from unintentionally
pressing the on/off switch.
Battery Charging (see figure A)
Do not use any other charger. The supplied charger is matched to the
u
lithium-ion battery that is fitted in your power tool.
Bosch Power Tools
(triax vector sum) and uncertainty K determined ac-
h
2
2
, K = 1.5 m/s
English | 31
1 609 92A 4SG | (25.02.2019)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis