Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Klarstein 10033342 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
EN
10

SAFETY INSTRUCTIONS

• Read all instructions carefully and keep the instructions for reference in a safe place.
• Remove all packaging material before using the unit for the first time. Wash the unit
with a damp cloth and dry it thoroughly before putting it into operation.
• The appliance is not intended for commercial use, but only for household and
similar environments.
• Place the appliance on a level, heat-resistant surface.
• Do not place the deep fryer next to or on top of a hob.
• Connect the appliance only to sockets which correspond to the voltage specified on
the appliance.
• Fill the deep fryer with the required amount of oil before use. Never use the
appliance without oil or grease as this could damage the appliance.
• Do not move the appliance while it is in use. You could scalding yourself with hot
oil. Wait until the appliance has cooled down completely.
• The appliance is equipped with a safety switch, should it overheat, it will be
switched off automatically.
• Never immerse the control panel and the heating element in water or other liquids.
• Only use oil that does not foam when heated.
CAUTION
Danger of burns! The surfaces become very hot during operation. Do
not touch them so that you do not burn yourself. Only use the device
with the handles provided.
• Do not put food that is too large in the deep fryer.
• Observe the time and temperature specified in the frying table.
• Hot steam escapes during frying. Keep a certain safety distance from the appliance
so that you do not injure yourself.
• When you are finished, turn the thermostat to the lowest setting. Disconnect the plug
from the socket and allow the oil to cool completely. Do not move the appliance
until it has cooled down completely.
• If the unit or power cord is damaged, have it repaired by a qualified service
technician. Do not attempt to repair the unit yourself or replace the power cord.
• Take care not to damage the heating element.
• The appliance has a built-in safety switch which guarantees that the appliance will
not start until all parts have been correctly positioned.
• If the appliance overheats, it is automatically switched off.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis