Function Description - GOK ODR Bio Montage- Und Bedienungsanleitung

7. FUNCTION DESCRIPTION

Model
Properties
Type ODR
Oil pressure regulator, with fixed adjustment
(description according to prEN 12514-1:2009 non-adjustable pressure
regulator)
Type ODR Bio
see Type ODR but also suitable for biogenic operating media
Type ODRE
Oil pressure regulator, adjustable:
(description according to prEN 12514-1:2009 adjustable pressure
regulator),
• Outlet pressure adjusted with handwheel and scale for 1m to 17m
Model Properties
Type ODRE-M
Oil pressure regulator, adjustable:
(description according to prEN 12514-1:2009 adjustable pressure
regulator),
• with display of outlet pressure on a pressure gauge 0 to 4bar, adjustable
• the outlet pressure of the pressure regulator can be adjusted so that
• the inlet pressure is 1.5bar higher than the outlet pressure
• when the flow rate is 0L/h, the set outlet pressure increases by
• the outlet pressure is dependent on the flow rate; if the flow rate is
The initial pressure of the adjustable oil pressure regulator is set as follows:
by loosening the set screw
the regulator cap
value on the oil column scale
 low number = low outlet pressure
 high number = higher outlet pressure
Retighten the set screw
Item No. 13 504 50 f
oil column
with T- screw
when the inlet pressures are between 0.5bar and 10bar, the outlet
pressure is in a range between 0bar and 2.5bar
approx. 1bar (closing pressure)
reduced, the outlet pressure increases regardless of the outlet pressure
that is set
, then rotating
and reading off the
:
.
by loosening the locknut
T-screw and reading off the value on the
pressure gauge,
 low number = low outlet pressure
 high number = higher outlet pressure
Retighten the locknut
, then rotating the
:
.
3 / 6