Herunterladen Inhalt Inhalt Diese Seite drucken

Baxtran TH Bedienungsanleitung Seite 8

Präzisionswaage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Congratulations on your purchase of the Digital Scale. This is a precision instrument designed specifi-
cally to provide reliability, durability, and outstanding performance.
In order to ensure the scale continues to deliver peak performance, please read these operation ins-
tructions carefully and thoroughly prior to initial usage.
1. Read all instructions before operating the scale.
2. Follow the basic safety precautions for all office equipment when using this scale.
3. The manufacturer does not warrant this unit to be waterproof. Do not expose this product to rain or
moisture.
4. Do not use the scale under sun or keep it away from heating appliances such as oven, stove, etc.
5. This scale does not contain any user-serviceable parts. Do not disassemble.
6. Use the scale for its intended purpose only.
Note: The display value may be affected by electromagnetic influences, e.g. when a radio is operated in the
immediate vicinity of the device. The product can be used for its intended purpose again when the interfe-
rence is discontinued, but may need to be switched on again to re-start.
BATTERY INSTALLATION
1. Turn the entire scale upside down and reset it securely on a firm, flat surface.
2. Remove the battery door.
3. Install the batteries in the battery compartment, ensuring that the positive side faces upward.
4. Close the battery door.
ESTADO BATERÍA
- When the low battery symbol
the battery compartment and replace the old batteries with new ones.
- Used batteries must not be disposed of as household waste. Do not incinerate batteries because they
might explode at high temperature. Contact your local authority for information concerning reclama-
tion and disposal of batteries.
- When replacing batteries, always use brand new batteries of the same type.
ACTIVATING THE SCALE
1. Turn the scale on by pressing
2. The LCD screen will show all characters for a few seconds and then "0g "will be shown on the dis-
play.
3. The scale turns off automatically after being idle for two minutes.
WEIGHING AN ITEM
1. Turn on the scale.
2. Place an item on the platform and the exact weight of item will be displayed.
SELECTING WEIGHT UNIT
Press the
8 8
appears on the LCD screen, it indicates that the battery is low. Open
key.
key repeatedly to change weight unit according to following sequence: g - oz
USER'S MANUAL TH
EN
1. INTRODUCTION
2. IMPORTANT
3. OPERATION

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis