Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connectors and control units
Line Input
1
RCA inputs for connecting lowlevel line
signals.
Input Level
2
Control for adjusting the input sensitivity of
the lowlevel Line Inputs for the individual ste-
reo signals.
HPF
3
Control for adjusting the highpass filter of
the channel pairs A/B and C/D from 15 Hz to
4,000 Hz.
X-Over
4
Switch for activating the filters for each
channel pair.
Power & Protect LED
8
This LED indicates the operating mode of the
amplifier.
Speaker Output
9
Speaker outputs for connecting speaker
systems.
+12 V
10
Connector for the +12 V power cable of the
positive terminal of the battery.
12
1
8
9
2
3
4
5
2
3
4
5
LPF
5
Control for adjusting the lowpass filter of the
channel pairs C/D and E/F from 40 Hz to
4,000 Hz.
Subsonic / HPF
6
Control for adjusting the subsonic / high-
pass filter of the channel pair E/F from 15 to
4,000 Hz.
Input Mode channel E/F
7
Switch to summate the input signals of
the channels E and F and to route it to the
respective amplifier channels.
10
11
12
REM
11
Connector for the remote cable.
GND
12
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
6
4
2
7
Werbung
Inhaltsverzeichnis
