TFA Dostmann 35.1068.IT Bedienungsanleitung Seite 74

POSITIONING THE TEMPERATURE TRANSMITTER:
The temperature transmitter is supplied with a holder that may be
attached to a wall with the two screws supplied. The temperature
transmitter can also be position on a flat surface by securing the stand
to the bottom of the temperature transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the screws and
plastic anchors.
2. Clip the temperature transmitter onto the bracket.
Note:
Before permanently fixing the temperature transmitter wall base,
place all units in the desired locations to check that the outdoor
temperature reading is receivable. In event that the signal is not
73