TFA Dostmann 35.1068.IT Bedienungsanleitung Seite 48

The probe can be connected to the remote temperature transmitter any time after initial
setup. There is no need to reset the units, should the probe be unplugged or re-plugged
again. The weather station will automatically detect the temperature probe data and will
display the temperature data on channel 2 after the probe is plugged.
INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
The temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries.
To install and replace the batteries, please follow the steps below:
1. Remove the battery compartment cover.
2. Insert the batteries, observing the correct polarity (see marking).
3.
Replace the battery compartment cover.
47