TFA Dostmann 35.1068.IT Bedienungsanleitung Seite 60

12/24 HOUR TIME DISPLAY SETTING
The time display can be set either in 12 - or 24 - hour format (default 24 hour format)
Use the IN button to select the "12 h" or "24 h" display mode.
1.
Press the SET again to confirm and to enter the "Manual time setting".
2.
Note:
When 24 h mode display is selected, the calendar format will be "date and month" display.
When 12 h mode display is selected, the calendar format will be "month and date" display.
MANUAL TIME SETTING
In case the weather station is not able to detect the atomic time (DCF) signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a
normal quartz clock.
Hours (flashing)
1. The hour and minute digits start flashing in the time display section.
Minutes (flashing)
59
flashing