Setting The Time And Exposure Count - Clas Ohlson TC-C1 Bedienungsanleitung

4.2 Setting the time and exposure count
Setting the time
Press [ ] repeatedly to advance to: DELAY, LONG
or INTVL.
1. The settings mode is entered. " 00:00'00" "
(hours: minutes: seconds) is displayed.
2. Press [ SET ] to start making settings, the hours
will flash.
3. Press [ ] upwards/downwards to the desired
hour (or press in [ ] to go directly to
the settings for minutes or seconds).
4. Press [ ] to confirm your setting and go to
the minutes setting. The minutes display will
then begin to flash.
5. Press [ ] upwards/downwards to the desired
minutes setting.
6. Press [ ] to confirm your setting and go to
the seconds setting. The seconds display will
then begin to flash.
7. Press [ ] upwards/downwards to the desired
seconds setting.
8. Press [ SET ] to confirm the time setting.
The time setting range is from 1 second to 99 hours,
59 minutes and 59 seconds.
Setting the exposure count
1. Press [ ] repeatedly to advance to N for the exposure count.
2. Press [ SET ], [ – – ] (a number) flashes.
3. Turn [ ] to the desired exposure count (max 399).
4. Press [ SET ] to confirm.
Setting the audio (speaker)
1. Press [ ] repeatedly to advance to .
2. Press [ SET ], will begin to flash.
3. Press [ ] upwards/downwards to
the desired setting: ON or OFF.
1
2
3
4
5
6
7
8
7
H M S
[ SET ]