Connecting The Remote Shutter Release To The Camera; Settings; Selecting A Mode - Clas Ohlson TC-C1 Bedienungsanleitung

When the battery symbol flashes on the display, the battery
should be changed. If you continue to use the remote shutter
release when the battery symbol is flashing, it will stop working
without warning.
• If the battery is removed, all the remote shutter release
settings will be erased.
• The capacity of the battery will temporarily drop at lower
temperatures and return to normal level at normal temperatures.
3. Connecting the remote shutter release to the camera
1. Remove the cap covering the remote
shutter release connection socket.
Place the cap into the holder (10) on
the remote shutter release.
3. Grip the connector and pull it straight out when
disconnecting the cable from the camera.

4. Settings

4.1 Selecting a mode
Press [ ] the required number of times to select
the desired mode:
DELAY (self-timer) –> LONG (long exposure)
–> INTVL (interval timer) –> N (exposure count)
–> (speaker ON/OFF) –> DELAY...
2. Press on the back of the connector
when connecting the remote
shutter release cable to
the camera.
6