Memorizing The Transmitters; Deleting Transmitters - Motostar S500R Installationsanleitung

Memorizing the transmitters

You can memorize up to 16* different codes/users. When the operator is idle:
1 Press and keep pressed S until
0 appears on the left side of the screen. The segments of the 0 on the left side of the screen rotate clockwise. Release the S
2
key.
Consecutively press twice the key that you want to memorize. The control unit will BEEP to confirm that the transmitter has
3
been memorized.
* When you try to memorize the 17th code (or transmitter) the courtesy light flashes slowly five times to signal that the memory is full.

Deleting transmitters

1 Keep S pressed until
2 0 appears on the left side of the screen. The segments of the 0 on the left side of the screen rotate clockwise.
3 When the 0 on the left disappears, release the S key: the transmitters have been deleted.