Electrical Connections; Input Voltage; Movement Control And Obstacle Detection - Motostar S500R Installationsanleitung

ELECTRICAL CONNECTIONS

Before powering up the board, cut off the mains power supply.
Power supply (V - 50/60 Hz): 230 AC
Board functions:

• Movement control and obstacle detection

• Reopening during closing
• Adjustable automatic reclosing time
• Open-stop-close-stop from transmitter and/or from button
• Courtesy light (at each opening command, the courtesy light stays on for three
minutes)
)

Input voltage

The operator is supplied with an electrical cable (L = 1.2 m) with an already connected Shuko plug.
Movement control and obstacle detection
When ; the door stops. To resume movement, either press
OPENING
a button or use the transmitter.
When : inverts the direction of travel until opening is
CLOSING
complete.
After three consecutive inversions, the door stays open and exclu-
des the automatic closing: to close, either use the transmitter or
button.
FUSES
- Line
LIGHTS
LED courtesy (W)
5 A F
≤ 1