Fitting The Transmission Arm To The Door; Fitting The Operator To The Guide - Motostar S500R Installationsanleitung

Fitting the transmission arm to the door

Fit the transmission arm brace to the upper beam of the door, perpendicularly to the traction guide
screws or other suitable fasteners.
If mounting the curved lever

Fitting the operator to the guide

Fit the adapter to the drive shaft.
The operator can be fitted onto the guide:
either in standard position
angle
.
fit it to the transmission arm by using the supplied nuts and bolts
or at a right
U-shaped brace
Micro
and fasten it using the supplied
Self-drilling 6 x 15 screw
Guide
Drive shaft with adapter