Assembling The Traction Guide; Positioning The Traction Guide - Motostar S500R Installationsanleitung

The following illustrations are just examples, in that the space available for fitting the operator and accessories varies depending on the
overall dimensions. It is up to the installer to find the most suitable solution.

Assembling the traction guide

Fitting the brace to the transmission guide

Positioning the traction guide

for sectional doors exceeding the overall dimensions of the spring-pole brace.
for overhead doors between 10 and 20 mm from the apex point of the leaf's slide arc.
for partially retracting protruding counter-balanced overhead doors, use the 801XC-0060 arm (see the enclosed technical literature).
use the supplied nut and bolt
M6x80
.
M6
801XC-0060